Tjenare.
Ja har en Adventure-800 ( 2005 ) som blandar alldeles för mycket 2T olja med bensinen,
spottar tom ut olja från avgassystemet.
Finns de någon skruv att ställa in blandningen med ?
Undefär som tomgången ?
M.v.h / Mikael.
Adventure-800 ( 2005 ) Blandar för mycket 2T olja... ?
-
- LynxTalk Member
- Inlägg: 38
- Blev medlem: 9 december 2011, 11:16
- Skoter: rave 800
- RannerKing
- Crew Member
- Inlägg: 2401
- Blev medlem: 22 februari 2011, 22:33
- Skoter: Boondocker RE 800-15 RangerKing 500- 98
- Ort: Vittangi/ Kiruna
Re: Adventure-800 ( 2005 ) Blandar för mycket 2T olja... ?
Nej, du justerar den nere vid oljepumpen under förgasarna.
Du ställer in den genom att linjera sträcket på armen mot den på själva oljepumpshuset.
Du ställer in den genom att linjera sträcket på armen mot den på själva oljepumpshuset.
Det finns nog inget släkte som är så tålmodiga och accepterar så mycket konstigheter som just skoterägare.
// Mattias

- 2stroke
- Crew Member
- Inlägg: 2327
- Blev medlem: 18 februari 2011, 14:37
- Skoter: LYNX R&D Prototype.
- Ort: Gällivare
- Kontakt:
Re: Adventure-800 ( 2005 ) Blandar för mycket 2T olja... ?
ADJUSTMENT
Oil Pump Cable
Prior to adjusting the pump, make sure throttle
cable adjustment is completed and engine is
stopped.
Stretch the adjusting cable through a maximum force of 32 Nm.
NOTE: It is better to have two persons to check the cable distance.
One stretching the cable and other taking measurements.
Check the visible distance of the stretched cable,
while one person is stretching it and other checking the distance.

Refer to the following table to know the visible stretched distance of the cable.


If the visible distance is less or more than specified above,
adjust the cable distance accordingly.
To do so, loosen lock nut, turn adjusting screw in or out,
retighten lock nut.

Oil Pump Cable
Prior to adjusting the pump, make sure throttle
cable adjustment is completed and engine is
stopped.
Stretch the adjusting cable through a maximum force of 32 Nm.
NOTE: It is better to have two persons to check the cable distance.
One stretching the cable and other taking measurements.
Check the visible distance of the stretched cable,
while one person is stretching it and other checking the distance.

Refer to the following table to know the visible stretched distance of the cable.


If the visible distance is less or more than specified above,
adjust the cable distance accordingly.
To do so, loosen lock nut, turn adjusting screw in or out,
retighten lock nut.

// 2stroke
* Var lojal mot ditt märke, behåll dina märkes kunskaper här på LynxTalk Forumet !! *
Kontakt : 2stroke@LynxTalk.se
* Var lojal mot ditt märke, behåll dina märkes kunskaper här på LynxTalk Forumet !! *
Kontakt : 2stroke@LynxTalk.se